The MF 154 HW is a compact submersible hot-water pump. It removes high-temperature wastewater from both domestic and commercial settings.
The MF 154 HW is a wastewater pump with vortex hydraulics that prevent clogging, for use in media whose temperature exceeds the standard limit (40 °C), up to a maximum permitted temperature of 80 °C.
This compact hot-water pump is fitted with a cast iron motor that is resistant to high water pressure and flooding, as well as a hydraulic system
Main benefits:
Maximum permitted temperature is 80 °C
Solids passage up to 20 mm
Compact shape, fittings (joints) for easy mounting and low base requirements make installation quick and cost-effective
Designed to cover a wide range of indoor and outdoor drainage applications
Designed mainly for media temperatures above the standard limit
Main applications:
Pumping high-temperature wastewater from laundries, dishwashing detergents and washing machines
Filling and emptying containers, draining flooded basements and removing rainwater
Suitable for use in septic tanks and for pumping effluent from locations below the backflow level in accordance with EN 12056
The vortex hydraulics are particularly suitable for pumping fluids containing gaseous or abrasive particles
Can be used in the ABS Sanimax lifting station
Main design features:
Temperature sensors
Oil-lubricated mechanical seal on the media side, oil-lubricated lip seal on the motor side
Stainless steel rotor running in ball bearings lubricated for life
Easy-to-use connection cable with Schuko plug
Main specifications
Capacity | 9 m3/h |
Head | 7.8 m |
Temperature | 80 °C |
Discharge pipe size | G 1 ½“ internal – 1 ¼“ adaptor |
Maximum speed | 2,900 min-1 |
content
adauga